ECCM-8 European Conference on Composite Materials: Science, Technologies and Applications, 3-6 June 1998, Naples, Volume 1Ignazio Crivelli Visconti Woodhead Publishing, 1998 - 654 pages |
From inside the book
Results 1-5 of 8
Page 9
Sorry, this page's content is restricted.
Sorry, this page's content is restricted.
Page 423
Sorry, this page's content is restricted.
Sorry, this page's content is restricted.
Page 446
Sorry, this page's content is restricted.
Sorry, this page's content is restricted.
Page 447
Sorry, this page's content is restricted.
Sorry, this page's content is restricted.
Page 448
Sorry, this page's content is restricted.
Sorry, this page's content is restricted.
Contents
Impediments to Wider use and some | 15 |
Composites in Aeronautics The Material Cost Issue | 21 |
The Influence of Bondline Thickness and Overlap Length | 31 |
Strength Prediction of Mechanically Fastened Joints in Composite Laminates | 47 |
Bearing Ability and NonLinear Fracture of Aerospace Composite | 55 |
Determination of the Bolt Flexibility of CFRPJoints | 61 |
Predicting Strength of Adhesively Bonded Composite Joints | 69 |
Numerical and Experimental Studies of Low Velocity Impact Damage | 77 |
Analysis of Composite ThinWalled MultiCelled Beams with Elastic Couplings | 173 |
Imperfections and Thermal Loads Influence Upon Aerospace | 189 |
A Study of Strength Behaviour After Cyclical Damaging in Polymer | 207 |
Overview of NonDestructive Evaluation of Polymer | 221 |
Characterization of Damages in Composites with Vibration Test Methods | 237 |
Using Artificial Neural Network for Structure Evaluation | 253 |
Manufacturing and Characterization of Titanium Matrix | 275 |
Design of Materials for Aviation and Space Technics | 291 |
Replacing Residual Compressive Strengths by Impact Force Data | 87 |
Effect of Cooling Rate on Impact Damage Resistance of Carbon | 95 |
Application of Fracture Mechanics Criteria to Laminated | 111 |
Influence of Impact Conditions on the Mechanical Behaviour | 125 |
The Interaction Between LowVelocity Impact and Fatigue | 144 |
Modeling of the NonLinear Behavior of Polymeric Resin Matrix Composites | 157 |
StructuralTechnological Design of an Advanced Composite Cylinder | 307 |
The Investigation of the Impact Properties of Knitted and Woven Fabric | 323 |
Analitical Simulation of Stress Wave Propagation in Composite Materials | 339 |
Development of composite empennage for Regional Transport Aircraft | 355 |
Oriented Composites for Load Bearing Bone Substitute Material | 371 |
Common terms and phrases
adherends adhesive analysis angle applications aramid beam behaviour bending bonded buckling carbon fibre CFRP characteristics components composite materials composite structures compressive strength configuration constant-life core crack curves cycles cylinder deformation delamination density determined developed dielectric displacement effect elastic elastic modulus epoxy evaluation experimental face factor fatigue fiber Figure finite element finite element analysis fracture glass impact damage impact energy impact tests increase interface interlaminar joint Kevlar knitted laminate lay-up layers length load longitudinal manufacturing matrix maximum mechanical properties method mode modulus moisture content obtained parameters performed pipe plastic plate plies polymer concrete predicted prepreg procedure ratio reinforced resin samples sandwich panels shear modulus shear strength shear stress shell shown simulation skin specimens stiffness stitching strain gauge stress concentration surface Table technique temperature tensile strength tension thermal thermoplastic thickness transverse unidirectional values velocity