ECCM-8 European Conference on Composite Materials: Science, Technologies and Applications, 3-6 June 1998, Naples, Volume 3Ignazio Crivelli Visconti Woodhead Publishing, 1998 - 444 pages |
Contents
A New Simplified Bending Test Method for Advanced Composites | 13 |
Finite Element Analysis of the Plate Twist Test Applied to Shear | 21 |
Shear Properties of Different Types of Textiles Composites | 29 |
The Derivation of Dynamic Youngs Modulus in Random Continuous Reinforced | 35 |
Local and Global Failure Criteria | 43 |
Failure Margins of Composite Laminates with Constant | 51 |
E Olkhovik IRCP Haifa Israel O Figovsky | 59 |
OpenHole Tension and Compression Strengths of CarbonEpoxy | 65 |
Processing and Properties of Carbon Fiber Reinforced | 207 |
A Model for the Degradation of Glass and Aramid Fibre Laminates | 223 |
New Possibilities of Increasing Accuracy for Nondestructive Testing | 239 |
Moiré Analysis of Thick Composite by Fast Fourier Transform Method | 253 |
Automated Acquisition and 3D Reconstruction of Glass Fibre Misalignments | 269 |
Measurement of Electrical Properties of CFRP for Damage Detection | 275 |
Bridging Stresses in Notched 2D CarbonCarbon Composites under | 293 |
Residual Stress in Joints by Neutron Diffraction at | 309 |
Elastoplastic Notch Factors and Strength of GraphitePeek | 73 |
The significance of damage in glass fibre composites loaded in inplane shear | 81 |
A Simplified Method for Predicting the Fatigue Strength | 89 |
Application of Markov Process to ChainofBundles Probability Model | 97 |
Damage Accumulation Modelling in Unidirectional Polymer Matrix Composites | 111 |
The Fatigue Behaviour of Filament Wound FibreglassVinylester Tubes Under | 127 |
Characterization of Room Temperature Curing Adhesives | 143 |
Influence of the Nature of the Coupling Agent on the Ageing of Glass | 157 |
Influence of Moisture on the StressStrain Response and Damage | 175 |
Environmental Rotating Bending Fatigue Behavior of Fiber | 191 |
ProblemSpecific Neural Networks for Detecting Structural Damage | 325 |
On the Processing and Testing of Smart Composite Reinforcements | 341 |
Strain and Damage Monitoring of Wind Turbine Blades | 357 |
Giant Magnetostriction Composite Materials and | 365 |
Ageing Studies of Polymers and Composites by NDT Techniques | 383 |
An Efficient Method for the Construction of Laminate Failure Envelopes | 403 |
The Plate Twist Test Applied to InPlane Shear | 417 |
NonDestructive Investigation of the Effects of Interface Volume Fraction | 433 |
Common terms and phrases
Acoustic Emission actuator amplitude analysis applied behaviour bending Bragg Grating calculated carbon carbon fibre CFRP characteristics components composite laminates composite materials compression computed constant criteria cure damage defects delamination developed dielectric displacement distribution Dry-R effect elastic embedded epoxy equation evaluation experimental fabrication factor failure fatigue fibre reinforced finite element fracture fracture mechanics frequency function hole in-plane in-situ increase interface layers length linear load longitudinal matrix composites matrix cracks measured mechanical properties monitoring notch number of cycles obtained optical fiber parameters piezoelectric plastic Poisson's ratio Polymer prediction pultrusion ratio residual stresses resin sample sensors shear modulus shear strength shear stress shear tests shown in Figure SiC fiber signal specimens static stiffness stitches strain gage strain rates stress concentration structure surface technique temperature tensile test test method textile composites thermal thickness transverse cracks ultrasonic unidirectional values Wet-R Young's modulus