 | Sandford Fleming, Canada. Department of Public Works - 1877 - 474 pages
...track, it must be made sufficiently solid to prevent bending the rails, or twisting the rail-joints. After the lift, the track shall be centred, lined,...surfaced and trimmed off' to a proper form and width. 83. In the event of full ballasting being required, a second " lift" must be made, in the same manner... | |
 | Canada. Department of Railways and Canals, Sandford Fleming - 1880 - 426 pages
...track, it must be made sufficiently solid to prevent bending the rails, or twisting the rail-joints. After the lift, the track shall be centred, lined,...surfaced and trimmed off to a proper form and width. Full ballast. 86. In the event of full ballasting boing required, a second "lift" must be made, in... | |
 | Canada. Royal commission to investigate charges against Sir A.P. Caron - 1893 - 626 pages
...track, it must be made sufficiently solid to prevent bending the rails or twisting the rail-joints. After the lift, the track shall be centred, lined,...surfaced and trimmed off to a proper form and width. 7th. In wet cuttings or where the foundations are too much affected by frost or water, the engineer... | |
 | Ontario. Legislative Assembly - 1905 - 840 pages
...prevent bending the rails or twisting the rail joints. After the lift the track shall be centered, lined, topped, surfaced and trimmed off to a proper...lift must be made in the same manner and with the same precautions as required for the first lift, in order to secure a uniforrii thickness of 10 inches... | |
| |
... packed under and around them. As the raising proceeds the end of the "lift" shall extend over not less than three rail lengths, and before trains are allowed to pass over the inclined portion of tra-ck, it must be made sufficiently solid to prevent... 