(6) Auditorium Roof

(a) Trusses

Angles, plates, channels, rivets, clips.

(b) Hangers, to gallery girders

Rods, clevises, turnbuckles, pins, pin-plates.

(c) Hangers to Ceiling

Rods, clevises, etc., and angles.

(d) Purlins

Channels, beams, angles, latticed trusses, braced beams or channels. (e) Pent House Framing

Angles, channels, beams.

(7) Elevator Well Framing

Angles, channels, beams

(8) Wall Framing

Spandrel Beams, lintels, etc

V. Proscenium Wall Framing

(1) Proscenium Girder

Plates, angles, fills, rivets, clips.

(2) Proscenium Arch Furring

(a) Furring Arches

Latticed angles, bent channels and beams.

(b) Connecting framing

Angles, struts, hangers.

(3) Miscellaneous

Lintels.

VI. Stage Framing.

(1) Sub-stage framing (fixed and removable)
Beams, channels.

(2) Stage-level framing (fixed and removable)
Beams, channels.

(3) 1st Fly gallery and Dressing-room framing
Beams, channels, railing, cleats.

(4) 2nd Fly Gallery and Dressing-room framing
Beams, channels, railing, cleats.

(5) Paint Bridge framing

Latticed girder, bracing angles, slat walk, railing.

(6) Gridiron Floor framing

(a) Hangers from roof trusses

Angles, flats, end-conns.

(b) Main Girders

Plates, Angles, Rivets, Latt. Girder.

(c) Cross Beams

Beams, channels.

(d) Gridiron

Channels, flats.

(7) Roof Framing

(a) Trusses

Angles, Plates, Rivets.

(b) Tower for Automatic Damper

Angle Framing.

(c) Purlins

Beams, channels.

(d) Tank Tower Framing
Angles, channels, beams.

(e) Pent House Framing

Angles, channels, beams.

(8) Elevator Well Framing

Angles, channels, beams

(9) Wall Framing

Spandrel Beams, channels, box girders, built girders, angles, Z-bars, lintels.

(d) Lateral Bracing Connections (Top and Bottom Chord).

Clevises, Pins, Turnbuckles, Nuts.

(b) For riveted type

End connection plates; Splice plates or angles.

(c) Bolts and Rivets (percent).

IX. Floors. (If floors are extensive, see schedule on p. 258).

(1) Main Material

(a) Beams, channels, angles, plate girders, box girders, etc.
(b) Checkered steel floor-plates.

(2) Details

End connections, shelf-angles, tie-rods, wall plates, wall anchors.

X. Partition Framing

(1) Main Material

Verticals; corner posts; girts; window and door framing. (2) Details

Connections; sag-rods; bolts and rivets (percent).

XI. Miscellaneous Framing

(1) Mullions (Main and monitor windows).

(2) Finishing Angles (Main and monitor cornices).
(3) Spacing Angles (Under purlins near wall).
(4) Machinery Brackets.

(5) Shafting Bracket Posts.

(6) Shafting Stringers.

(7) Curb Angles.

(8) Stair Stringers.

(9) Hoppers; Bunkers; etc.

(10) Elevator Framing.

ESTIMATE REMINDER FOR A STEEL TRUSS R. R. BRIDGE

Note. If the weight of the details can be obtained sufficiently accurately as a proportion of the weight of the main members, consideration of the same may be omitted in consulting this schedule.

I. Trusses

(1) Main Members

Top Chord.

Bottom Chord.

End Posts.

Int. Posts.

Diagonals.
Counters.

Sub-verticals.

Angles, plates, channels.

Angles, plates, channels, Eye-bars.
Angles, plates, channels.

Angles, plates, channels.

Angles, plates, channels, Eye-bars.
Angles, plates, channels, Adjustable Bars.
Angles, plates, channels, Eye-bars.