Printed Circuit Boards: Design, Fabrication, and Assembly
McGraw Hill Professional, 2005 M09 7 - 704 pages
The printed circuit is the basic building block of the electronics hardware industry. This is a comprehensive single volume self-teaching guide to the art of printed circuit board design and fabrication -- covering the complete cycle of PCB creation, design, layout, fabrication, assembly, and testing.
Results 1-3 of 89
Through-hole components (Figure 2.2a) are those components which have leads
that can be inserted through mounting holes in the circuit board. On the other
hand, surface mount components (Figure 2.2b) are so designed that they can be
The switching is silent, causes no arcing and is unaffected by vibration and
corrosive atmospheres. The control input is optically isolated (Figure 2.101d)
from the zero voltage switching circuit which produces virtually no RF
Figure 5.4 shows preferred angles of taping an artwork. Although the traces could
be directed at almost any angle, it is important that all traces running parallel lie
at the same angle for uniformity. It would also ensure optimum utilization of the ...
What people are saying - Write a review
1 Basics of Printed Circuit Boards
2 Electronic Components
3 Layout Planning and Design
15 other sections not shown
Other editions - View all
Printed Circuit Boards: Design, Fabrication, Assembly and Testing
R. S. Khandpur
Limited preview - 2005
Printed Circuit Boards : Design, Fabrication, and Assembly: Design ...
No preview available - 2005