Printed Circuit Boards: Design, Fabrication, and Assembly
McGraw Hill Professional, 2005 M09 7 - 704 pages
The printed circuit is the basic building block of the electronics hardware industry. This is a comprehensive single volume self-teaching guide to the art of printed circuit board design and fabrication -- covering the complete cycle of PCB creation, design, layout, fabrication, assembly, and testing.
Results 1-3 of 56
Acids: In electroplating shops, acids like sulphuric acids, hydrochloric acid and
nitric acid are used for preparing electroplating solutions. When mixing these
materials, protective clothing, aprons, gloves and chemical goggles should be
Process Control and Regeneration Hydrogen peroxide/sulphuric acid etchant is
used in immersion as well as spray etching operations. The process is controlled
by composition balance by recovery of copper sulphate as the by-product in ...
No smoking and eating is advised in the area where these chemicals are kept. a
Personal safely should be accorded highest priority. It is advisable to wear
impermeable and acid-proof aprons, gloves, face masks with filters and goggles.
a All ...
What people are saying - Write a review
1 Basics of Printed Circuit Boards
2 Electronic Components
3 Layout Planning and Design
15 other sections not shown
Other editions - View all
Printed Circuit Boards: Design, Fabrication, Assembly and Testing
R. S. Khandpur
Limited preview - 2005
Printed Circuit Boards : Design, Fabrication, and Assembly: Design ...
No preview available - 2005