Printed Circuit Boards: Design, Fabrication, and Assembly
McGraw Hill Professional, 2005 M09 7 - 704 pages
The printed circuit is the basic building block of the electronics hardware industry. This is a comprehensive single volume self-teaching guide to the art of printed circuit board design and fabrication -- covering the complete cycle of PCB creation, design, layout, fabrication, assembly, and testing.
Results 1-3 of 54
They are compatible with acrylic, epoxy and polyimide bonding adhesives (Crum,
1994). Pyralux AP is a double-sided copper clad laminate with an adhesiveless
composite of polyimide film bonded to copper foil. The all-polyimide dielectric ...
13.11.1 Requirements of Adhesive The adhesive should be selected to meet the
following basic requirements: a Hold the component in the given place during the
cure process a Maintain that orientation through the wave soldering operations ...
184.108.40.206 Stencil Printing In this method, a squeegee pushes the adhesive down
into the apertures and ensures full aperture fill and contact to the board by
stroking across the stencil. Proper alignment is a must to ensure the correct
What people are saying - Write a review
1 Basics of Printed Circuit Boards
2 Electronic Components
3 Layout Planning and Design
15 other sections not shown
Other editions - View all
Printed Circuit Boards: Design, Fabrication, Assembly and Testing
R. S. Khandpur
Limited preview - 2005
Printed Circuit Boards : Design, Fabrication, and Assembly: Design ...
No preview available - 2005