Printed Circuit Boards: Design, Fabrication, and Assembly
McGraw Hill Professional, 2005 M09 7 - 704 pages
The printed circuit is the basic building block of the electronics hardware industry. This is a comprehensive single volume self-teaching guide to the art of printed circuit board design and fabrication -- covering the complete cycle of PCB creation, design, layout, fabrication, assembly, and testing.
Results 1-3 of 80
It is basically a cutting method applicable to all kinds of base materials, generally
of less than 2 mm thickness. When cutting boards have more than 2 mm
thickness, shearing results in the edge finish which is coarse and unclean, and
14.6.4 Acceptability Criteria 188.8.131.52 Base Material Visual inspection may be
used to check several major characteristics of the base materials. These are
delineated below. Conductor area Type and Manufacture: One must verify that
Base Material Thickness: The thickness of the base material, excluding metal foil
or material deposited on the surfaces. Base Material: The insulating material (
either rigid or flexible) as well as the copper foils bonded on one or both sides.
What people are saying - Write a review
1 Basics of Printed Circuit Boards
2 Electronic Components
3 Layout Planning and Design
15 other sections not shown
Other editions - View all
Printed Circuit Boards: Design, Fabrication, Assembly and Testing
R. S. Khandpur
Limited preview - 2005
Printed Circuit Boards : Design, Fabrication, and Assembly: Design ...
No preview available - 2005