Printed Circuit Boards: Design, Fabrication, and Assembly
McGraw Hill Professional, 2005 M09 7 - 704 pages
The printed circuit is the basic building block of the electronics hardware industry. This is a comprehensive single volume self-teaching guide to the art of printed circuit board design and fabrication -- covering the complete cycle of PCB creation, design, layout, fabrication, assembly, and testing.
Results 1-3 of 75
Considering the maximum allowed temperature rise, caused by the copper track,
Table 4.1 gives the minimum allowable ... It may be remembered that 1mm track
width has a safe current rating of a little more than 2 A and this will not cause an ...
De-wetting is generally caused by certain types of contaminants on the surface of
the base metal, for example, the ... as well as by large crystallites of the inter-
metallic layers which grow on the solder surface and cause the solder to recede.
13.41 Minimum side joint length — the joint is not acceptable if 'D' is less than the
lead width or 0.5 mm, whichever is less 22.214.171.124 Solder Balls/Splashes Solder
balls/splashes are commonly caused by incomplete curing of the solder resist ...
What people are saying - Write a review
1 Basics of Printed Circuit Boards
2 Electronic Components
3 Layout Planning and Design
15 other sections not shown
Other editions - View all
Printed Circuit Boards: Design, Fabrication, Assembly and Testing
R. S. Khandpur
Limited preview - 2005
Printed Circuit Boards : Design, Fabrication, and Assembly: Design ...
No preview available - 2005