Printed Circuit Boards: Design, Fabrication, and Assembly
McGraw Hill Professional, 2005 M09 7 - 704 pages
The printed circuit is the basic building block of the electronics hardware industry. This is a comprehensive single volume self-teaching guide to the art of printed circuit board design and fabrication -- covering the complete cycle of PCB creation, design, layout, fabrication, assembly, and testing.
Results 1-3 of 77
The methods commonly used are: (i) Manual Cleaning Process — This includes:
a Chemical Cleaning; and a De-greasing (vapour or aqueous) (ii) Mechanical
Cleaning. 7.2.1 Manual Cleaning Process 22.214.171.124 Chemical Cleaning or Cold ...
This is done through three methods: a) Analysis of solution or wet chemical
analysis; b) Physical test on solution; and c) Testing of electrodeposits. 8.7.1
Analysis of Solution (Wet Chemical Analysis) The wet chemical analysis is
carried out to ...
Etching is one of the major steps in the chemical processing of the subtractive
PCB process. By this process, the final copper pattern is achieved by selective
removal of all the unwanted copper to retain the desired circuit patterns. The
What people are saying - Write a review
1 Basics of Printed Circuit Boards
2 Electronic Components
3 Layout Planning and Design
15 other sections not shown
Other editions - View all
Printed Circuit Boards: Design, Fabrication, Assembly and Testing
R. S. Khandpur
Limited preview - 2005
Printed Circuit Boards : Design, Fabrication, and Assembly: Design ...
No preview available - 2005