Printed Circuit Boards: Design, Fabrication, and Assembly
McGraw Hill Professional, 2005 M09 7 - 704 pages
The printed circuit is the basic building block of the electronics hardware industry. This is a comprehensive single volume self-teaching guide to the art of printed circuit board design and fabrication -- covering the complete cycle of PCB creation, design, layout, fabrication, assembly, and testing.
Results 1-3 of 74
3.4.1 Conductor Dimensions In general, conductor width is determined by: a
Component packing density; a Minimum spacing between conductors and
components; and a Geometrical constraints due to component outlines. In former
3.4.4 Inductance of PCB Conductors In designing the conductor patterns for fast
signal or high speed logic circuits, Inductance [nH/cm] the inductive couplings are
also of major 18 Conductor : 35 um Conductor concern. In logic circuits ...
Conductor angles should be made at 45 or 90 degrees or 30/60 degrees. ... 5.3.2
Conductor Routing conductor routing: a Even in circuit patterns where plenty of
space is available and the conductors can be run in any direction, it is essential ...
What people are saying - Write a review
1 Basics of Printed Circuit Boards
2 Electronic Components
3 Layout Planning and Design
15 other sections not shown
Other editions - View all
Printed Circuit Boards: Design, Fabrication, Assembly and Testing
R. S. Khandpur
Limited preview - 2005
Printed Circuit Boards : Design, Fabrication, and Assembly: Design ...
No preview available - 2005