Printed Circuit Boards: Design, Fabrication, and Assembly
McGraw Hill Professional, 2005 M09 7 - 704 pages
The printed circuit is the basic building block of the electronics hardware industry. This is a comprehensive single volume self-teaching guide to the art of printed circuit board design and fabrication -- covering the complete cycle of PCB creation, design, layout, fabrication, assembly, and testing.
Results 1-3 of 80
Laminate material Tg Dielectric constant Dissipation factor (°C) (10 GHz) (10 GHz
) Polyimide 280 4.3 0.020 Liquid crystal polymer 280 2.8 0.002 A large variety of
copper clad laminates are commercially available these days. They have been ...
of copper. The copper foil is normally available in large rolls weighing 136 to 181
kg (300-400 pounds). Table 6.2 shows the standard thickness of commonly used
copper foil. The vast majority of laminates used are with foils of 305 gr./m2 or ...
In general, ammonium, sodium and potassium persulphates, with the addition of
certain catalysts, can be used for the etching of copper in PCB manufacturing.
However, continuous regenerative systems based on ammonium persulphate
What people are saying - Write a review
1 Basics of Printed Circuit Boards
2 Electronic Components
3 Layout Planning and Design
15 other sections not shown