Printed Circuit Boards: Design, Fabrication, and Assembly
McGraw Hill Professional, 2005 M09 7 - 704 pages
The printed circuit is the basic building block of the electronics hardware industry. This is a comprehensive single volume self-teaching guide to the art of printed circuit board design and fabrication -- covering the complete cycle of PCB creation, design, layout, fabrication, assembly, and testing.
Results 1-3 of 55
6.1.3 Copper Foil The conductive layer on a laminate can be made of copper,
nickel, stainless steel or beryllium copper. However, the most widely used
substance is copper due its easy availability, cost and functionality. Copper
cladding can ...
of copper. The copper foil is normally available in large rolls weighing 136 to 181
kg (300-400 pounds). Table 6.2 shows the standard thickness of commonly used
copper foil. The vast majority of laminates used are with foils of 305 gr./m2 or ...
Two types of copper foils are used for flexible laminates today: (i) rolled annealed
(also known as wrought foil), and (ii) electrodeposited foil. The manner in which
foils are manufactured, either rolled annealed or electrodeposited, determines ...
What people are saying - Write a review
1 Basics of Printed Circuit Boards
2 Electronic Components
3 Layout Planning and Design
15 other sections not shown
Other editions - View all
Printed Circuit Boards: Design, Fabrication, Assembly and Testing
R. S. Khandpur
Limited preview - 2005
Printed Circuit Boards : Design, Fabrication, and Assembly: Design ...
No preview available - 2005