Printed Circuit Boards: Design, Fabrication, and Assembly
McGraw Hill Professional, 2005 M09 7 - 704 pages
The printed circuit is the basic building block of the electronics hardware industry. This is a comprehensive single volume self-teaching guide to the art of printed circuit board design and fabrication -- covering the complete cycle of PCB creation, design, layout, fabrication, assembly, and testing.
Results 1-3 of 66
The defect often disappears when the board is re-soldered. However, the ...
13.14.3 Solder Joint Defects and their Common Causes A wide range of defects
is observed in the soldered boards along with their common causes. Table 13.4 ...
the printed circuits should be carefully planned so that all the faults or defects are
picked up, rectified and brought within acceptable limits. 14.1.1 Classification of
Defects Any aspect or parameter of the printed board that does not conform to ...
Terminal Surface Defects: Visual inspection may be carried out to look for the
following surface defects shown in Figure 14.15: area a Void (absence of
material in a localized area); a Dent (depression in the conductive foil, which nor-
What people are saying - Write a review
1 Basics of Printed Circuit Boards
2 Electronic Components
3 Layout Planning and Design
15 other sections not shown
Other editions - View all
Printed Circuit Boards: Design, Fabrication, Assembly and Testing
R. S. Khandpur
Limited preview - 2005
Printed Circuit Boards : Design, Fabrication, and Assembly: Design ...
No preview available - 2005