Printed Circuit Boards: Design, Fabrication, and Assembly
McGraw Hill Professional, 2005 M09 7 - 704 pages
The printed circuit is the basic building block of the electronics hardware industry. This is a comprehensive single volume self-teaching guide to the art of printed circuit board design and fabrication -- covering the complete cycle of PCB creation, design, layout, fabrication, assembly, and testing.
Results 1-3 of 35
Electroplating is the process by which a metal is deposited on a conductive
surface by passing a direct current through an electrolytic solution containing a
soluble salt of the metal. When a uni-directional current is passed through a
In electroplating, buffers have an important influence on the process parameters.
8.2.6 Anodes In electroplating, the positive electrodes or anodes are used in the
form of bars, plates, rods or pallets. The metal used may be the same as that of ...
The fingers or tabs are electroplated (Figure 8.11) by manual or automatic
techniques. Gold electroplating is now replaced by rhodium, platinum and
palladium electroplating on contact tabs or fingers. Printed Circuit Board Finger
or Tabs Gold ...
What people are saying - Write a review
1 Basics of Printed Circuit Boards
2 Electronic Components
3 Layout Planning and Design
15 other sections not shown
Other editions - View all
Printed Circuit Boards: Design, Fabrication, Assembly and Testing
R. S. Khandpur
Limited preview - 2005
Printed Circuit Boards : Design, Fabrication, and Assembly: Design ...
No preview available - 2005