Printed Circuit Boards: Design, Fabrication, and Assembly
McGraw Hill Professional, 2005 M09 7 - 704 pages
The printed circuit is the basic building block of the electronics hardware industry. This is a comprehensive single volume self-teaching guide to the art of printed circuit board design and fabrication -- covering the complete cycle of PCB creation, design, layout, fabrication, assembly, and testing.
Results 1-3 of 24
As the ferric chloride etchant attacks tin, this is not suitable for tin or tin-lead
plated boards. This etchant is an aqueous solution of 28 to 42 per cent by weight
of ferric chloride. The solution has a specific gravity of 1.353 to 1.402. It operates
Process Control and Regeneration Hydrogen peroxide/sulphuric acid etchant is
used in immersion as well as spray etching operations. The process is controlled
by composition balance by recovery of copper sulphate as the by-product in ...
When the quantity of copper in the solution reaches its upper limit, a pump is
activated to replenish the etching solution and to simultaneously remove the
etchant until the desired density is achieved. The system is regenerated by
removal of ...
What people are saying - Write a review
1 Basics of Printed Circuit Boards
2 Electronic Components
3 Layout Planning and Design
15 other sections not shown
Other editions - View all
Printed Circuit Boards: Design, Fabrication, Assembly and Testing
R. S. Khandpur
Limited preview - 2005
Printed Circuit Boards : Design, Fabrication, and Assembly: Design ...
No preview available - 2005