Printed Circuit Boards: Design, Fabrication, and Assembly
McGraw Hill Professional, 2005 M09 7 - 704 pages
The printed circuit is the basic building block of the electronics hardware industry. This is a comprehensive single volume self-teaching guide to the art of printed circuit board design and fabrication -- covering the complete cycle of PCB creation, design, layout, fabrication, assembly, and testing.
Results 1-3 of 88
In this method, a separate screen process film supported on the backing sheet is
used. The film master is exposed on to this film, followed by film developing
which dissolves the unexposed areas of the film and leaves the rest on the
Water soluble films will resist all type of inks except those having a water base.
Printing inks such as vinyls, lacquers, epoxy ... Knife-cut films are available in
various colours with different film thicknesses. Knife-cut films may be adhered to
Increased thickness, uniformity and ease of application are the strong points for
the dry film photo-resists. The dry film resist is available as a composite material
consisting of three different layers as shown in Figure 7.11. The photo polymer ...
What people are saying - Write a review
1 Basics of Printed Circuit Boards
2 Electronic Components
3 Layout Planning and Design
15 other sections not shown
Other editions - View all
Printed Circuit Boards: Design, Fabrication, Assembly and Testing
R. S. Khandpur
Limited preview - 2005
Printed Circuit Boards : Design, Fabrication, and Assembly: Design ...
No preview available - 2005