Printed Circuit Boards: Design, Fabrication, and Assembly
McGraw Hill Professional, 2005 M09 7 - 704 pages
The printed circuit is the basic building block of the electronics hardware industry. This is a comprehensive single volume self-teaching guide to the art of printed circuit board design and fabrication -- covering the complete cycle of PCB creation, design, layout, fabrication, assembly, and testing.
Results 1-3 of 76
Therefore, the air flow arrangement must be so designed that it can deliver the
volume of air required to restrict the temperature rise of the board within the
permissible limit. Reliability can thus get degraded unless special attention is
paid to ...
The fingers on the SolderQuick tape will help to align the component. a Before
gas flow is initiated, the component should ... The gas will heat up the legs and
the solder on the pads. a When the solder flows, the component should be
15.4.2 Water Use Reduction Technique One of the best ways of reducing the
copper in the effluent is to limit the usage of water counter flow flare method. The
most effective technique to reduce the water consumed in any plant is to use a ...
What people are saying - Write a review
1 Basics of Printed Circuit Boards
2 Electronic Components
3 Layout Planning and Design
15 other sections not shown
Other editions - View all
Printed Circuit Boards: Design, Fabrication, Assembly and Testing
R. S. Khandpur
Limited preview - 2005
Printed Circuit Boards : Design, Fabrication, and Assembly: Design ...
No preview available - 2005