Printed Circuit Boards: Design, Fabrication, and Assembly
McGraw Hill Professional, 2005 M09 7 - 704 pages
The printed circuit is the basic building block of the electronics hardware industry. This is a comprehensive single volume self-teaching guide to the art of printed circuit board design and fabrication -- covering the complete cycle of PCB creation, design, layout, fabrication, assembly, and testing.
Results 1-3 of 77
The copper foil is normally available in large rolls weighing 136 to 181 kg (300-
400 pounds). Table 6.2 shows the standard thickness of commonly used copper
foil. The vast majority of laminates used are with foils of 305 gr./m2 or lower.
Two types of copper foils are used for flexible laminates today: (i) rolled annealed
(also known as wrought foil), and (ii) electrodeposited foil. The manner in which
foils are manufactured, either rolled annealed or electrodeposited, determines ...
Raw foil Treated foil Stage I: Bonding (anchoring) treatment Stage II: Stage III:
Thermal barrier (yellow) Stabilization (anti-oxidation) Foil Stabilization Treatment:
Also called passivation or anti-oxidation, this treatment is applied on both sides of
What people are saying - Write a review
1 Basics of Printed Circuit Boards
2 Electronic Components
3 Layout Planning and Design
15 other sections not shown
Other editions - View all
Printed Circuit Boards: Design, Fabrication, Assembly and Testing
R. S. Khandpur
Limited preview - 2005
Printed Circuit Boards : Design, Fabrication, and Assembly: Design ...
No preview available - 2005