Printed Circuit Boards: Design, Fabrication, and Assembly
McGraw Hill Professional, 2005 M09 7 - 704 pages
The printed circuit is the basic building block of the electronics hardware industry. This is a comprehensive single volume self-teaching guide to the art of printed circuit board design and fabrication -- covering the complete cycle of PCB creation, design, layout, fabrication, assembly, and testing.
Results 1-3 of 78
3.6.5 Supply and Ground Conductors The primary consideration in a power or
ground conductor is to provide a direct connection from the device to the power
supply. As this is not always possible, the next best step is to increase the width
a Voltage and ground signal conductors have to be provided with sufficient width
to keep resistance and inductance low and to carry the required current,
otherwise the conductor will act like a fuse. a While connecting voltage and
Internal and external current spikes are superimposed and must be carried by the
same VCC (supply) and ground lines. If many similar gates or flip-flops are
connected to the same point, the current spikes will become excessive and the ...
What people are saying - Write a review
1 Basics of Printed Circuit Boards
2 Electronic Components
3 Layout Planning and Design
15 other sections not shown
Other editions - View all
Printed Circuit Boards: Design, Fabrication, Assembly and Testing
R. S. Khandpur
Limited preview - 2005
Printed Circuit Boards : Design, Fabrication, and Assembly: Design ...
No preview available - 2005