Printed Circuit Boards: Design, Fabrication, and Assembly
McGraw Hill Professional, 2005 M09 7 - 704 pages
The printed circuit is the basic building block of the electronics hardware industry. This is a comprehensive single volume self-teaching guide to the art of printed circuit board design and fabrication -- covering the complete cycle of PCB creation, design, layout, fabrication, assembly, and testing.
Results 1-3 of 85
In multi-layer boards, the increase in cost is not directly proportional to the
increase in the number of conductor layers. For example, doubling the number of
layers from four to eight will probably increase cost by only 30 per cent. However,
if the ...
... dielectric losses increase in proportion to the length. a For large-sized PCBs,
dielectric losses play an important role. ... otherwise the rise-time increase could
be as high as 1 nsec/cm. a Provide ground lines (grounded or connected via a ...
... temperature and moisture absorbed as follows: a Increase in frequency results
in decrease in the dissipation factor. a Increase in temperature results in increase
in the dissipation factor. a Increase in moisture constant results in proportional ...
What people are saying - Write a review
1 Basics of Printed Circuit Boards
2 Electronic Components
3 Layout Planning and Design
15 other sections not shown
Other editions - View all
Printed Circuit Boards: Design, Fabrication, Assembly and Testing
R. S. Khandpur
Limited preview - 2005
Printed Circuit Boards : Design, Fabrication, and Assembly: Design ...
No preview available - 2005