Printed Circuit Boards: Design, Fabrication, and Assembly
McGraw Hill Professional, 2005 M09 7 - 704 pages
The printed circuit is the basic building block of the electronics hardware industry. This is a comprehensive single volume self-teaching guide to the art of printed circuit board design and fabrication -- covering the complete cycle of PCB creation, design, layout, fabrication, assembly, and testing.
Results 1-3 of 80
When the PCB layout is complete, the track layout information is provided on self-
adhesive type crepe material tape stuck on a plastic sheet such as polyester. The
layout or artwork is usually enlarged two to four times to improve accuracy.
(1.5 to 2.5 mm) must be provided for all leads, wires, hardware, etc., to ensure
that protruding leads through the non-component side of the printed circuit board
do not short-out to the adjacent board. Additional clearances are required in case
Keeler (1990a) explains that in subtractively processed double-sided printed
circuit boards, electroless plating applies copper on the walls of drilled holes to
provide electrical connectivity between the top and bottom of the PCB. In the case
What people are saying - Write a review
1 Basics of Printed Circuit Boards
2 Electronic Components
3 Layout Planning and Design
15 other sections not shown
Other editions - View all
Printed Circuit Boards: Design, Fabrication, Assembly and Testing
R. S. Khandpur
Limited preview - 2005
Printed Circuit Boards : Design, Fabrication, and Assembly: Design ...
No preview available - 2005