Printed Circuit Boards: Design, Fabrication, and Assembly
McGraw Hill Professional, 2005 M09 7 - 704 pages
The printed circuit is the basic building block of the electronics hardware industry. This is a comprehensive single volume self-teaching guide to the art of printed circuit board design and fabrication -- covering the complete cycle of PCB creation, design, layout, fabrication, assembly, and testing.
Results 1-3 of 72
Removing multi-lead components such as integrated circuits presents a special
problem. If the component to be removed is still functional, it must be de-soldered
quickly lest it be damaged by heat. Alternatively, if the device is defective, it also ...
a Remove any assemblies, plugs, wire that will facilitate repair work. a Label the
component to be removed. a Observe carefully how the component is placed
before removing it. Record information regarding polarity, placement angle, ...
It is ensured that the solder is removed from the hole, and then cleaned, before a
new component is placed on the board. On a surface mount board, it is
unsoldered. The difference between the two is that on the through-hole board,
What people are saying - Write a review
1 Basics of Printed Circuit Boards
2 Electronic Components
3 Layout Planning and Design
15 other sections not shown
Other editions - View all
Printed Circuit Boards: Design, Fabrication, Assembly and Testing
R. S. Khandpur
Limited preview - 2005
Printed Circuit Boards : Design, Fabrication, and Assembly: Design ...
No preview available - 2005