Printed Circuit Boards: Design, Fabrication, and Assembly
McGraw Hill Professional, 2005 M09 7 - 704 pages
The printed circuit is the basic building block of the electronics hardware industry. This is a comprehensive single volume self-teaching guide to the art of printed circuit board design and fabrication -- covering the complete cycle of PCB creation, design, layout, fabrication, assembly, and testing.
Results 1-3 of 69
Copper clad laminates are manufactured by pressing layers of filler material
impregnated with resin under heat and pressure with copper foil. A hydraulic
press is used for this purpose. Although the following manufacturing procedures
can be ...
6.2.2 Process The three primary raw materials — glass, resin and copper-are
pressed at the laminator to give a fully cured final product that is dimensionally
stable and resistant to moisture, chemicals and thermal excursions occurring in
The three basic sets of raw materials used to manufacture conventional rigid
multi-layer boards are: (i) a resin system, (ii) the reinforcing fabric; and (iii) metal
foil. The boards are mostly made by using glass cloth, coated or impregnated
with a ...
What people are saying - Write a review
1 Basics of Printed Circuit Boards
2 Electronic Components
3 Layout Planning and Design
15 other sections not shown
Other editions - View all
Printed Circuit Boards: Design, Fabrication, Assembly and Testing
R. S. Khandpur
Limited preview - 2005
Printed Circuit Boards : Design, Fabrication, and Assembly: Design ...
No preview available - 2005