Printed Circuit Boards: Design, Fabrication, and Assembly
McGraw Hill Professional, 2005 M09 7 - 704 pages
The printed circuit is the basic building block of the electronics hardware industry. This is a comprehensive single volume self-teaching guide to the art of printed circuit board design and fabrication -- covering the complete cycle of PCB creation, design, layout, fabrication, assembly, and testing.
Results 1-3 of 29
After this process of alkaline soak, the laminate is effectively rinsed with filtered
tap water which is oilWater Rinse Wet Brushing free. Water immersion, followed
by strong water spray, ensures complete removal of cleaners. Neutral or acidic ...
In general, the following operations are carried out in sequence to complete the
electroless plating on a PCB: a Laminate deburring; a Laminate cleaning; a
Water rinse; a Micro-etch or etch back multi-layer boards; a Water rinse; a
Dipping in ...
The PCBs are copper electroplated at different stages, which are: a Panel Plating
, and a Pattern Plating. Panel Plating Process — This involves: a Electroless
copper plating; a Inspection; a Acid dip-10% H2SO4 a Water rinse (de-
What people are saying - Write a review
1 Basics of Printed Circuit Boards
2 Electronic Components
3 Layout Planning and Design
15 other sections not shown