Printed Circuit Boards: Design, Fabrication, and Assembly
McGraw Hill Professional, 2005 M09 7 - 704 pages
The printed circuit is the basic building block of the electronics hardware industry. This is a comprehensive single volume self-teaching guide to the art of printed circuit board design and fabrication -- covering the complete cycle of PCB creation, design, layout, fabrication, assembly, and testing.
Results 1-3 of 86
For high power applications, SOT-194, as shown in Figure 2.87, has been
developed which can allow power dissipation of up to 4 watts when used with a
suitable heat dissipating interconnection substrate. An outline of a four - lead
The male or plug connector symbol is shown in Figure 2.102a. The female
receptacle symbol is shown in Figure 2.102b. The plug or male contacts always
constitute the removable part of a connector assembly and the receptacle is the ...
There are typically two configurations of PCB stripline: a Centred or Symmetric
Strip Line: In this configuration, which is shown in Figure 4.22, the signal trace is
sandwiched symmetrically, i.e. centred between the two reference planes. This is
What people are saying - Write a review
1 Basics of Printed Circuit Boards
2 Electronic Components
3 Layout Planning and Design
15 other sections not shown
Other editions - View all
Printed Circuit Boards: Design, Fabrication, Assembly and Testing
R. S. Khandpur
Limited preview - 2005
Printed Circuit Boards : Design, Fabrication, and Assembly: Design ...
No preview available - 2005