Printed Circuit Boards: Design, Fabrication, and Assembly
McGraw Hill Professional, 2005 M09 7 - 704 pages
The printed circuit is the basic building block of the electronics hardware industry. This is a comprehensive single volume self-teaching guide to the art of printed circuit board design and fabrication -- covering the complete cycle of PCB creation, design, layout, fabrication, assembly, and testing.
Results 1-3 of 80
1.4.2 Double-sided Printed Circuit Boards 'Double-sided' printed circuit boards
have wiring patterns on both sides of the insulating material, i.e. the circuit pattern
is available both on the components side and the solder side. Obviously, the ...
Two Layer Artwork In this method (Figure 5.3), separate artworks are prepared for
the component side and the solder side of the PCB. The method is tedious as it is
quite difficult to achieve accurate registration between the two layers.
13.9.3 Combinations of Mixed Technologies In mixed assembly boards, there are
several variations, which are shown in Figure 13.20. a Single-sided board: mixed
com- One side Side 1 (a) ponents on the same side (b) (c) a Double-sided ...
What people are saying - Write a review
1 Basics of Printed Circuit Boards
2 Electronic Components
3 Layout Planning and Design
15 other sections not shown
Other editions - View all
Printed Circuit Boards: Design, Fabrication, Assembly and Testing
R. S. Khandpur
Limited preview - 2005
Printed Circuit Boards : Design, Fabrication, and Assembly: Design ...
No preview available - 2005