Printed Circuit Boards: Design, Fabrication, and Assembly
McGraw Hill Professional, 2005 M09 7 - 704 pages
The printed circuit is the basic building block of the electronics hardware industry. This is a comprehensive single volume self-teaching guide to the art of printed circuit board design and fabrication -- covering the complete cycle of PCB creation, design, layout, fabrication, assembly, and testing.
Results 1-3 of 80
The base material, which is usually very thin, is in the range of 0.1 mm thickness.
Laminates used in flexible boards are available with copper on one or both sides
in rolls. Rigid-flex boards, which constitute a combination of rigid and flexible ...
Resistance: This is the nominal value of resistance between the two leads of the
resistor when measured at 25°C. Tolerance: This is the maximum deviation of
value of resistance from the nominal value, usually given as a percentage of the ...
This is usually done by providing a heat sink. Discrete power devices are usually
supplied in packages which ... Power DIP packages are usually provided with a
metal slug in the body to which good thermal contact can be made with an ...
What people are saying - Write a review
1 Basics of Printed Circuit Boards
2 Electronic Components
3 Layout Planning and Design
15 other sections not shown