Printed Circuit Boards: Design, Fabrication, and Assembly
McGraw Hill Professional, 2005 M09 7 - 704 pages
The printed circuit is the basic building block of the electronics hardware industry. This is a comprehensive single volume self-teaching guide to the art of printed circuit board design and fabrication -- covering the complete cycle of PCB creation, design, layout, fabrication, assembly, and testing.
Results 1-3 of 12
use of broad signal conductors which may result in a wave impedance of 50 W or
less should be avoided in TTL circuits, as the IC may be damaged due to large
negative voltage spikes. Also, very high impedance lines ( ≥ 200 W) should also
Such a transmission line has a certain impedance, called the 'Wave Impedance'.
A broad conductor has a smaller wave impedance than a narrow conductor.
Similarly, a conductor which is near the ground plate will have a smaller wave ...
Waveform integrity can be achieved by calculating the proper wave impedance of
signal conductors. Wave impedance of a signal conductor depends upon the
conductor width. a Cross-talk: Like reflection, cross-talk is a transmission line ...
What people are saying - Write a review
1 Basics of Printed Circuit Boards
2 Electronic Components
3 Layout Planning and Design
15 other sections not shown
Other editions - View all
Printed Circuit Boards: Design, Fabrication, Assembly and Testing
R. S. Khandpur
Limited preview - 2005
Printed Circuit Boards : Design, Fabrication, and Assembly: Design ...
No preview available - 2005